DriverZone.com: The place to find device driver updates.

***********************************************************
* 3.  INSTALLING THE SOFTWARE
***********************************************************

General Installation Notes:

1.  The operating system must be installed prior to the
    installation of the driver.
2.  This installation procedure is specific only to the 
    version of driver and installation file included in 
    this release.
3.  This procedure assumes that all of the software
    associated with this release is located in the same
    directory.


AUTOMATED INSTALL USING SETUP.EXE
---------------------------------
1. To Install the Intel(R) System Controller Hub (Intel® SCH) 
   Chipset drivers, you will download ZIP file and unzip it 
   using a utility such as WinZip* or PKZip*. 

2. Click the 'Start' button in the task bar, click 'Run' 
   and then select 'Setup.exe' from the hard drive 
   directory where the driver files are stored.  The 
   Install dialog will appear.

3. click 'Next' to continue.  

4. Read License Agreement and click Yes to proceed.
 
5. When the 'Setup COMPLETE' message appears click 'Finish'
   to restart your computer.



MANUAL "HAVE-DISK" INSTALLATION INSTRUCTIONS
--------------------------------------------

To install from a Web download, you will download either a 
ZIP file or an EXE file from the Web.

a. If it is an EXE file, double-click the file you 
   downloaded and specify a location into which the  driver
   files will be extracted. Click "Unzip" and the files 
   will extract. Click "OK" on the next window, then click 
   "Close". 

b. If it is a ZIP file, you must unzip it using a utility 
   such as WinZip* or PKZip*. 


Microsoft Windows* Vista Installation Instructions for 
Intel(R) System Controller Hub (Intel® SCH) Chipset Graphics Driver
-------------------------------------------------

1.  Click on the Start button, right click on "Computer", and
    then click "Properties".

2.  Click on "Device Manager" in the "Tasks" pane. 

3.  Double click "Display adapters". Double click on the 
    graphics controller shown.

4.  Click on "driver" tab and click the "Update Driver..." button.

5.  Select the "Browse my computer for driver software" option.

6.  Select the "Let me pick from a list of device drivers on my
    computer" option.

7.  Click on the "Have Disk..." button and then the 
    "Browse..." button.

9.  Enter the directory where you unzipped the file you 
    downloaded, and then enter the "Graphics" subdirectory.
    Double click the "lpcoUDA.INF" file.

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the Poulsbo display
    adapter and then click on the "Next" button. 

11. Click on the "Next" button. The operating system will 
    install the driver. Click on the "Close" button when 
    done.

12. If a dialog asking to reboot is displayed, click on the "Yes" 
    button to automatically reboot.  Otherwise, manually restart 
    the system.  The driver should now be loaded. 
    

To determine if the driver has been loaded correctly, refer
to the Verifying Installation section below.